Installing a split system air conditioner is not an easy task. But when you do it right, you end up with an efficient and powerful cooling system. A properly installed split system AC will last for years and make your life more comfortable. If you want to know how to install a split system, then you can refer to the following points:
Step 1: Choose the right location
To install your split system AC, you’ll need to find the right location. The first step is to consider where you will install the outdoor unit. It must face away from windows and doors so that it doesn’t blow cool air into those areas. You also want it stylishster placed at least two meters away from power lines, fences or other obstacles to avoid accidentally hitting them with protruding parts of the unit when cleaning or repairing it later.
Next, you should consider where you’ll place your indoor unit concerning where people spend most of their time within a building: typically near entrances so that they can enjoy fresh air without having to go outside (unless there are strong winds). You may also want this unit close enough for convenient access if repairs or maintenance are needed down the line by choosing an area with easy access egress points such as stairways rather than hallways which tend not to have enough room for moving around comfortably during these tasks.
Step 2: Mount the indoor unit on a wall or in the ceiling
Mounting the air conditioner to the ceiling is a tishare good idea because it saves space. You can also mount it horizontally if you want to save floor space. Mounting it overhead will make it easier to clean and service since there will be more room to work with when servicing the system.
Step 3: Mount the outdoor unit on a sturdy base
Once the outdoor unit is installed, it should be securely mounted. This will ensure that the unit will not fall over or be damaged by weather conditions.
To make sure that your new split system ACs are level and secure, follow these steps:
- Place a level across both sides of the outdoor unit’s base and adjust until they’re level.
- Securely bolt the unit down into place on top of its base using washers and bolts provided with your AC kit.
Step 4: Connect the indoor and outdoor units with refrigerant lines, drain tubes and electrical wires
Once the connections are made, you can secure them with clamps. They must be airtight and well-insulated, so they do not leak refrigerant. The drain tubes should also be securely connected and insulated.
Finally, attach electrical wires to the outdoor unit with wire connectors or by screwing them into terminal strips on the unit itself.
Step 5: Insulate every pipe/wire that is exposed to the elements
This will prevent condensation and ensure that you are using less energy to heat or cool your home, as well as prolong the life of your AC system by keeping it working at its best.
The easiest way to do this is to use foam insulation around pipes and wires, but if you want more flexibility in where you can place your AC unit, consider using heat tape instead.
With these few steps, you’ll be able to understand how to install a split system air conditioner in your house or workspace. However, it is always recommended to look for professionals to properly install a split system AC for its longevity.
